Size:

The steps are as follows:

1. Clean the inside and outside of the car window to avoid affecting the effect of the rear sticker;

2. Cut the appropriate car film according to the glass size, which can be slightly larger because it will shrink slightly after being blown by the hot air blower;

3. Before applying the film, spray some water on the glass and onto the torn protective film surface to reduce the viscosity of the adhesive layer and adjust the position of the alignment film;

4. The car window glass has a certain curvature and can be baked with a hot air blower.

5. Spray some cleaning solution on the inner glass, and then spray it on the torn protective film surface. After aligning the position, it can be affixed;

6.During the pasting process, there may be some bubbles and water. Use a scraper to remove bubbles and moisture;

7. Finally, check for any bubbles, wrinkles, scratches, etc. Between the car film and glass. If there are no issues, use a towel to wipe the water off the edges of the glass.

Package includes:

1 X Window Tinting Film Roll